dmesg - Lenovo with 1030
microcode: microcode updated early to revision 0x21, date = 2019-02-13
Linux version 5.3.0-53-generic (buildd@lgw01-amd64-016) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #47~18.04.1-Ubuntu SMP Thu May 7 13:10:50 UTC 2020 (Ubuntu 5.3.0-53.47~18.04.1-generic 5.3.18)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dcc8bfff] usable
BIOS-e820: [mem 0x00000000dcc8c000-0x00000000dce03fff] reserved
BIOS-e820: [mem 0x00000000dce04000-0x00000000dce18fff] ACPI data
BIOS-e820: [mem 0x00000000dce19000-0x00000000dceb9fff] reserved
BIOS-e820: [mem 0x00000000dceba000-0x00000000dcec1fff] ACPI data
BIOS-e820: [mem 0x00000000dcec2000-0x00000000dd573fff] usable
BIOS-e820: [mem 0x00000000dd574000-0x00000000deea0fff] ACPI NVS
BIOS-e820: [mem 0x00000000deea1000-0x00000000df03bfff] reserved
BIOS-e820: [mem 0x00000000df03c000-0x00000000df03cfff] usable
BIOS-e820: [mem 0x00000000df03d000-0x00000000df07ffff] ACPI NVS
BIOS-e820: [mem 0x00000000df080000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 3227G87/MAHOBAY, BIOS 9SKT70AUS 06/07/2013
tsc: Fast TSC calibration using PIT
tsc: Detected 3392.173 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x21e000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FF0000000 write-back
2 base 210000000 mask FF8000000 write-back
3 base 218000000 mask FFC000000 write-back
4 base 21C000000 mask FFE000000 write-back
5 base 0E0000000 mask FE0000000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
total RAM covered: 8160M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcf80-0x000fcf8f]
check: Scanning 1 areas for low memory corruption
BRK [0x11b401000, 0x11b401fff] PGTABLE
BRK [0x11b402000, 0x11b402fff] PGTABLE
BRK [0x11b403000, 0x11b403fff] PGTABLE
BRK [0x11b404000, 0x11b404fff] PGTABLE
BRK [0x11b405000, 0x11b405fff] PGTABLE
BRK [0x11b406000, 0x11b406fff] PGTABLE
BRK [0x11b407000, 0x11b407fff] PGTABLE
BRK [0x11b408000, 0x11b408fff] PGTABLE
BRK [0x11b409000, 0x11b409fff] PGTABLE
BRK [0x11b40a000, 0x11b40afff] PGTABLE
BRK [0x11b40b000, 0x11b40bfff] PGTABLE
BRK [0x11b40c000, 0x11b40cfff] PGTABLE
RAMDISK: [mem 0x330db000-0x35864fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000DCE04088 00008C (v01 LENOVO TC-9S 00001460 AMI 00010013)
ACPI: FACP 0x00000000DCE16530 00010C (v05 LENOVO TC-9S 00001460 AMI 00010013)
ACPI: DSDT 0x00000000DCE041A0 01238B (v02 LENOVO TC-9S 00001460 INTL 20051117)
ACPI: FACS 0x00000000DEE8E080 000040
ACPI: APIC 0x00000000DCE16640 000072 (v03 LENOVO TC-9S 00001460 AMI 00010013)
ACPI: FPDT 0x00000000DCE166B8 000044 (v01 LENOVO TC-9S 00001460 AMI 00010013)
ACPI: MCFG 0x00000000DCE16700 00003C (v01 LENOVO TC-9S 00001460 MSFT 00000097)
ACPI: SLIC 0x00000000DCE16740 000176 (v01 LENOVO TC-9S 00001460 AMI 00010013)
ACPI: HPET 0x00000000DCE168B8 000038 (v01 LENOVO TC-9S 00001460 AMI. 00000005)
ACPI: SSDT 0x00000000DCE168F0 00036D (v01 LENOVO TC-9S 00001460 INTL 20091112)
ACPI: SSDT 0x00000000DCE16C60 0009AA (v01 LENOVO TC-9S 00001460 INTL 20051117)
ACPI: SSDT 0x00000000DCE17610 000B22 (v01 LENOVO TC-9S 00001460 INTL 20051117)
ACPI: DMAR 0x00000000DCE18138 000080 (v01 LENOVO TC-9S 00001460 INTL 00000001)
ACPI: ASF! 0x00000000DCE181B8 0000A5 (v32 LENOVO TC-9S 00001460 TFSM 000F4240)
ACPI: BGRT 0x00000000DCE18260 000038 (v00 LENOVO TC-9S 00001460 AMI 00010013)
ACPI: TCPA 0x00000000DCE18298 000032 (v02 LENOVO TC-9S 00001460 MSFT 01000013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021dffffff]
NODE_DATA(0) allocated [mem 0x21dfd1000-0x21dffbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000021dffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000dcc8bfff]
node 0: [mem 0x00000000dcec2000-0x00000000dd573fff]
node 0: [mem 0x00000000df03c000-0x00000000df03cfff]
node 0: [mem 0x00000000df080000-0x00000000df7fffff]
node 0: [mem 0x0000000100000000-0x000000021dffffff]
Zeroed struct page in unavailable ranges: 17829 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000021dffffff]
On node 0 totalpages: 2079323
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14123 pages used for memmap
DMA32 zone: 903871 pages, LIFO batch:63
Normal zone: 18304 pages used for memmap
Normal zone: 1171456 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdcc8c000-0xdce03fff]
PM: Registered nosave memory: [mem 0xdce04000-0xdce18fff]
PM: Registered nosave memory: [mem 0xdce19000-0xdceb9fff]
PM: Registered nosave memory: [mem 0xdceba000-0xdcec1fff]
PM: Registered nosave memory: [mem 0xdd574000-0xdeea0fff]
PM: Registered nosave memory: [mem 0xdeea1000-0xdf03bfff]
PM: Registered nosave memory: [mem 0xdf03d000-0xdf07ffff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists, mobility grouping on. Total pages: 2046811
Policy zone: Normal
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8033300K/8317292K available (14339K kernel code, 2369K rwdata, 4668K rodata, 2664K init, 5072K bss, 283992K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 43313 entries in 170 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190703
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000dce19000 end: 0x000000dce4dfff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e56cec54d, max_idle_ns: 440795330232 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.34 BogoMIPS (lpj=13568692)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 4 processors activated (27137.38 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdd574000-0xdeea0fff] (26398720 bytes)
PM: Registering ACPI NVS region [mem 0xdf03d000-0xdf07ffff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 21:24:45, date: 2020-05-23
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1590269085.032:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E92D4190000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E92D418F800 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E92D4377E00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 17 GPEs in block 00 to 3F
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf713c000-0xf713c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7]
pci 0000:00:16.3: reg 0x14: [mem 0xf713a000-0xf713afff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7139000-0xf7139fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7138000-0xf71383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7137000-0xf71373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7136000-0xf71367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7135000-0xf71350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1d01] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x4 link at 0000:00:01.0 (capable of 31.504 Gb/s with 8 GT/s x4 link)
pci 0000:01:00.1: [10de:0fb8] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdcc8c000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdd574000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf03d000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x21e000000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x0200-0x020f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] has been reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:03: [io 0x0a00-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: [io 0x0218-0x0219] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf2000000-0xf2000fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:02: resource 13 [mem 0xe0000000-0xfeafffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 22150 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a0 took 23422 usecs
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 40488K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xd8c8c000-0xdcc8c000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf1000000, mapped to 0x000000009e47bc49, using 1216k, total 1216k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:16.3: ttyS4 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
tpm_tis 00:06: 1.2 TPM (device-id 0xFE, rev-id 71)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7138000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.3.0-53-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7137000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.3.0-53-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.3.0-53-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.3.0-53-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x306a9, pf=0x2, revision=0x21
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (815229780, 197117)->(822472744, -7045847)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 08838d266c8704d3d582ec0b8cbad5486d1a5fab'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 4:326:450
machinecheck: hash matches
rtc_cmos 00:01: setting system clock to 2020-05-23T21:24:45 UTC (1590269085)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2664K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1476K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ahci 0000:00:1f.2: version 3.0
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136180 irq 28
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136280 irq 28
ata5: DUMMY
ata6: DUMMY
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: new full-speed USB device number 2 using xhci_hcd
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) fc:4d:d4:3b:cf:ab
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
e1000e 0000:00:19.0 eno1: renamed from eth0
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-1: New USB device found, idVendor=05ac, idProduct=1003, bcdDevice= 4.20
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Hub in Apple Extended USB Keyboard
usb 3-1: Manufacturer: Mitsumi Electric
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 3 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-10: WDC WD10EZEX-08WN4A0, 02.01A02, max UDMA/100
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-08W 1A02 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb 3-2: new low-speed USB device number 3 using xhci_hcd
usb 3-2: New USB device found, idVendor=17ef, idProduct=608d, bcdDevice= 1.00
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Lenovo USB Optical Mouse
usb 3-2: Manufacturer: PixArt
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt Lenovo USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:17EF:608D.0001/input/input2
hid-generic 0003:17EF:608D.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Lenovo USB Optical Mouse] on usb-0000:00:14.0-2/input0
usb 3-1.3: new full-speed USB device number 4 using xhci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: ATAPI: PLDS DVD-RW DH16ACSH, JL3B, max UDMA/100
ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM PLDS DVD-RW DH16ACSH JL3B PQ: 0 ANSI: 5
tsc: Refined TSC clocksource calibration: 3392.282 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5d3a863b, max_idle_ns: 440795241822 ns
clocksource: Switched to clocksource tsc
sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 3-1.3: New USB device found, idVendor=05ac, idProduct=020b, bcdDevice= 4.30
usb 3-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1.3: Product: Apple Extended USB Keyboard
usb 3-1.3: Manufacturer: Mitsumi Electric
input: Mitsumi Electric Apple Extended USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:05AC:020B.0002/input/input3
hid-generic 0003:05AC:020B.0002: input,hidraw1: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:14.0-1.3/input0
input: Mitsumi Electric Apple Extended USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:05AC:020B.0003/input/input4
input: Mitsumi Electric Apple Extended USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:05AC:020B.0003/input/input5
hid-generic 0003:05AC:020B.0003: input,hidraw2: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:14.0-1.3/input1
ata4: SATA link down (SStatus 0 SControl 300)
fbcon: Taking over console
Console: switching to colour frame buffer device 80x30
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Reached target Slices.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[338]: Received request to flush runtime journal from PID 1
bpfilter: Loaded bpfilter_umh pid 357
Started bpfilter
testing the buffer
testing the buffer
testing the buffer
testing the buffer
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS
testing the buffer
testing the buffer
testing the buffer
testing the buffer
testing the buffer
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190703/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRE) (20190703/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRE) (20190703/utaddress-213)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190703/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
audit: type=1400 audit(1590269094.811:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=571 comm="apparmor_parser"
audit: type=1400 audit(1590269094.811:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=571 comm="apparmor_parser"
audit: type=1400 audit(1590269094.811:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=571 comm="apparmor_parser"
audit: type=1400 audit(1590269094.851:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=607 comm="apparmor_parser"
IPMI message handler: version 39.2
RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
ipmi device interface
audit: type=1400 audit(1590269094.923:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=572 comm="apparmor_parser"
audit: type=1400 audit(1590269094.931:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1590269094.947:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=568 comm="apparmor_parser"
audit: type=1400 audit(1590269094.947:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=568 comm="apparmor_parser"
audit: type=1400 audit(1590269094.947:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=568 comm="apparmor_parser"
audit: type=1400 audit(1590269094.947:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=568 comm="apparmor_parser"
cryptd: max_cpu_qlen set to 1000
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 239
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.59 Thu Jan 30 01:00:41 UTC 2020
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 440.59 Thu Jan 30 00:59:18 UTC 2020
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
nvidia-uvm: Loaded the UVM driver, major device number 237.
resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
caller os_map_kernel_space.part.13+0x6d/0x80 [nvidia] mapping multiple BARs
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: RAPL package-0 domain package locked by BIOS
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller os_map_kernel_space.part.13+0x6d/0x80 [nvidia] mapping multiple BARs
kauditd_printk_skb: 37 callbacks suppressed
audit: type=1400 audit(1590269112.291:49): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/sbin/mysqld" pid=1096 comm="apparmor_parser"
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller os_map_kernel_space.part.13+0x6d/0x80 [nvidia] mapping multiple BARs
rfkill: input handler disabled
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
audit: type=1400 audit(1590271372.676:50): apparmor="DENIED" operation="capable" profile="/snap/core/9066/usr/lib/snapd/snap-confine" pid=4526 comm="snap-confine" capability=4 capname="fsetid"
audit: type=1400 audit(1590271375.632:51): apparmor="DENIED" operation="open" profile="snap.gnome-system-monitor.gnome-system-monitor" name="/var/lib/snapd/desktop/applications/ohmygiraffe_ohmygiraffe.desktop" pid=4526 comm="gnome-system-mo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1590271375.632:52): apparmor="DENIED" operation="open" profile="snap.gnome-system-monitor.gnome-system-monitor" name="/var/lib/snapd/desktop/applications/chromium_chromium.desktop" pid=4526 comm="gnome-system-mo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1590271375.632:53): apparmor="DENIED" operation="open" profile="snap.gnome-system-monitor.gnome-system-monitor" name="/var/lib/snapd/desktop/applications/gnome-characters_gnome-characters.desktop" pid=4526 comm="gnome-system-mo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1590271375.632:54): apparmor="DENIED" operation="open" profile="snap.gnome-system-monitor.gnome-system-monitor" name="/var/lib/snapd/desktop/applications/gnome-calculator_gnome-calculator.desktop" pid=4526 comm="gnome-system-mo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1590271375.632:55): apparmor="DENIED" operation="open" profile="snap.gnome-system-monitor.gnome-system-monitor" name="/var/lib/snapd/desktop/applications/sftpclient_sftpclient.desktop" pid=4526 comm="gnome-system-mo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1590271375.632:56): apparmor="DENIED" operation="open" profile="snap.gnome-system-monitor.gnome-system-monitor" name="/var/lib/snapd/desktop/applications/gnome-logs_gnome-logs.desktop" pid=4526 comm="gnome-system-mo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1590271375.632:57): apparmor="DENIED" operation="open" profile="snap.gnome-system-monitor.gnome-system-monitor" name="/var/lib/snapd/desktop/applications/minetest_minetest.desktop" pid=4526 comm="gnome-system-mo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1590271376.380:58): apparmor="DENIED" operation="open" profile="snap.gnome-system-monitor.gnome-system-monitor" name="/run/mount/utab" pid=4526 comm="gnome-system-mo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1590271376.544:59): apparmor="DENIED" operation="open" profile="snap.gnome-system-monitor.gnome-system-monitor" name="/proc/2675/attr/current" pid=4526 comm="gnome-system-mo" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
perf: interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 79250